Shooters Forum banner
1 - 1 of 11 Posts

· Registered
3 Posts
Getting ready to load at the range, I loaded on the other side of the shop for practice. I got a &#3620 Lee press and mounted it to a 2X4. I clamp the 2X4 to the bench with a C clamp.

Likewise I clamp the powder measure to the bench with a C clamp.

Getting ready to load one caliber remotely is fairly easy, if one takes primed brass. The hard part is getting a stable and eye level place for the scale.

(Edited by clark at 7:46 pm on April 21, 2001)
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.