Shooters Forum banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
has anyone loaded imr 7828 with a 100 gr. btsp bullet?
if so, please comment on accuracy, etc.
 

·
Banned
Joined
·
23 Posts
That is my load.  I use it all the time.  If I do my job it will group under an inch for three shots.  I don't shoot more than three for groups as the bbl gets hot and the groups will open.  There have been times when everything is just right and 3 shots will fit under a dime.  No brag just fact.  But like I said I have to do my part.  As I get older and my eyes get weaker the forgoing will probably be relegated to history. LOL.

Keep your powder dry.

Bill
 

·
Registered
Joined
·
6 Posts
ive used h1000 under 95g partions with good results, and its a little slower in 243 than 7828
 

·
Beartooth Regular
Joined
·
2,212 Posts
Alan,
    I have used it with Hornady 100 BTSP with excellent results. I used the IMR data, which is quite a bit warmer than most manuals, but saw no undue pressure signs.
                                                                       IDShooter
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top