Shooters Forum banner

reloading bench hardware?

3226 Views 12 Replies 8 Participants Last post by  Bullie
I've got a set of plans for a reloading bench, looks good, but it calls for "4 sets, each 23" long double track for sliding doors"

The doors are made from 1/4" ply wood. It's the set of plans from NRMA.

Any ideas where to get the door tracks?

1 - 2 of 13 Posts
Actually, you can cut slots in the shelving to serve for that if you have a table saw or operate a router well.
Last suggestion; IF you have a way to make slots in the shelving, inlet the "slide guides" fully into the boards, flush with the surface. That will make them look really nice and protect them from damage as you access items behind the doors.
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.