Shooters Forum banner
1 - 1 of 3 Posts

· Registered
51 Posts
I've been sizing all the brass I buy for years after the same thing happened to me. (No case tension on the bullet.) Having a progressive press on the bench makes case prep a snap, even if you intend to weigh every charge and seat & crimp on the single stage.

I've got a Dillon 650 so I can dump 20 rounds of .45 Colt into the clear plastic tube ( I don't want the electric case feeder) and turn out 100 rounds of sized & belled brass in minutes. Very nice timesaver.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.