Shooters Forum banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
1 - 1 of 1 Posts

·
Inactive account
Joined
·
788 Posts
I had the same problem with a Rossi in .357. fortunately the fellow that I bought it from was up front about the problem (wouldn't always eject), and had a small bag with a couple of parts that had fallen out.
Turns out that it would eject all rounds except for the last, as the shell carrier would hit the case from below and throw it out.
I reassembled the ejector a couple of times, and it would still pop out after a few shots. The final solution was to get a new ejector assembly from a Browning and it was fixed. Has worked for thousands of rounds since.
I looked at the original assembly closely and I couldn't see anything wrong. That is why we went to the Browning assembly.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top