Shooters Forum banner
1 - 1 of 1 Posts

· Banned
Joined
·
738 Posts
ID Shooter,
A gunsmith that put the taller front sight on my OM Blackhawk, mentioned that in addition to the pin he used to affix the new blade, he epoxyed it too.
You could do that, or get some Locktite sleeve retainer and use that.  With the sleever retainer you don't have to take the sight off.  It will wick into the slight gap around the sight.  
The Locktite can be had a most hardware store and car parts places.
Hope this helps.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top