Shooters Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
HEY! ANYBODY OUT THERE HAVE ANY WORKING SCHEMATICS FOR AN OLD J C HIGGINS BOLT ACTION SHOTGUN?<!--emo&???--><img src="http://beartoothbullets.com/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'><!--endemo--> MODEL #583.22 20 GA.   ALSO TIPS ON PLUGGING TUBE MAGAZINE HELPFUL!
 

·
Beartooth Regular
Joined
·
7,768 Posts
Hi, Jethro:
  I can't help you with a schematic, but most old pump guns used a wood dowell that fits inside the magazine spring. About 3/8" works well. You don't want a tube diameter dowell that compresses the spring when the magazine is empty. Cut the dowell a bit long and try it, then shorten as necessary.
As my old blacksmith said, "Cut it off twice and it was still too short". <!--emo&:)--><img src="http://beartoothbullets.com/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'><!--endemo-->

Bye
Jack

(Edited by Jack Monteith at 10:34 pm on Jan. 18, 2002)
 

·
Registered
Joined
·
628 Posts
Jethro,

Check Numrich <http://www.gunpartscorp.com/> they have schematics for hundreds of firearms ....seems to me &#363 per set.

Lobo in NM
 

·
Super Moderator
Joined
·
3,365 Posts
Gentlemen,

Sorry to have been absent here, but have been working non-stop on lots of fronts.  Bullets being the foremost, and this website the second.  One of the features you'll find go online with the new website tomorrow, is a remake of GuNuts!  It will be totally interactive, much like LoadSwap.com, where you can add schematics and exploded view drawings of firearms from a very simply interfaced control panel.  It won't have any member mumbo-jumbo, and uploading a scanned image will be quick, easy and hassle free, for situations just like this where someone needs a schematic, chances are someone else will too, at a later time.  This will provide for an ever increasing and more comprehensive resource for everyone.  We think you'll like the changes!

Better go make a bullet!

God Bless,

Marshall
 
1 - 5 of 5 Posts
Top