Shooters Forum banner
1 - 2 of 7 Posts

· Beartooth Regular
1,178 Posts
I'd say clamp the barrel securely in a well padded vice, swing out or remove the cylinder and drive the slug back to the breach end with a close fitting brass rod or wood dowel and heavy hammer. Use the weight of the hammer head itself to do the work. Carefully.

As an added thought, spray the barrel down a bit with a good lube to aid in it's removal.

Lead or Jacketed bullet?

Regards, Ray
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.