Shooters Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Recently picked up a Win. 94 in .357...
I bought it in used but unfired condition....
A trip to the range revealed that it had an issue with ejecting cartridges...
It's an angle eject and it looks as if the extractor/ejector is weak, sometimes it will cleanly eject a spent cartridge and other times the case just barely clear the reciver or drops back into the action...
Any suggestions?
 

·
Registered
Joined
·
154 Posts
You might want to try a good clean job....Some Simple Green or similar to clear possible gunk. Without inspection, would be hard to speculate much further.
 

·
Registered
Joined
·
28 Posts
Discussion Starter #5
It is in new condition, which means it has sat around for a while...I'll give it a good thorough cleaning and put some rounds down range...see if that doesnt help loosen it up a bit, work some of the burrs out or at least prove the problem is other than being new...
Thanks!
Pete
 
1 - 5 of 5 Posts
Top