Shooters Forum banner

Using paper clip to check for case head separation

3961 Views 5 Replies 5 Participants Last post by  big dan
How does this trick work? I'm assuming a 90 degree bend on the paper clip's end, then check for what? Will you feel a click or valley if you've got an imminent case head failure?
1 - 1 of 6 Posts
my thought monty is that a straight walled case might fare better bepending on how much of the case is unsupported... to me a tapered case, especially a heavily tapered case simply acts as a wedge.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.