Shooters Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
863 Posts
Okay, basically it sets up exactly like any other seater, all that is different is how and where you insert the bullet.

Raise a charged case fully. Unscrew the die seating stem and then screw the die down until it lightly contacts the case, screw it back up a tad and lock it. Lower the ram until the case mouth is visible at the bottom of the window, insert the bullet in the window and raise the ram fully up. Screw the seating stem down until it contacts the bullet and continue normally until you get the OAL you want.
 
1 - 2 of 2 Posts
Top