[Marshall Stanton]

Yep, the work's been done, but the rifle still calls me!  Perhaps when we get caught up a little, and there's time for more liesure activities (such as rifle building and wildcatting) I'll get that .375 Beartooth built up on a Marlin action... right now I'm thinking stainless... time will tell.  As for my rifle, it's going to have a 22" tube and a 3/4 length magazine tube, topped by a set of Ashley sights.  This cartridge was designed and wrapped around a 250-275 grain gas-checked bullet both for efficiency and in neck length in regard to throat lenth and available action length considerations.  Only shooting will tell the tale!

God Bless,

Marshall

 

[Marshall Stanton]

Gentlemen,

The cartridge is based on a .458x2" case originally, but since have altered plans and will employ the .350 Remington Mag case for a basis, but the dimensions will remain unchanged. (the neck thickness is better suited using the .350 Rem brass).

Here's the link, with the case drawings and other pertinent specifications.

<a href="http://beartoothbullets.com/cgi-bin/ikonboard/topic.cgi?forum=15&topic=11" target='_blank'>http://beartoothbullets.com/cgi-bin....opic=11</a>

I think this will be a real performer once put into the field!

God Bless,

Marshall