Shooters Forum banner
1 - 1 of 1 Posts

·
The Troll Whisperer (Moderator)
Joined
·
24,244 Posts
You don't have to take the bolt apart to free up the ejector button. As suggested above, hose it down with some gun degreaser, spraying directly into the ejector hole and then manipulating the button as you previously described with the punch. Hold the bolt face down when pushing in and out to allow the shipping crud to wash out.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top